© 2020 by www.debaer.ch 


Turntable Saphir

Diamond Among the Turntables

The SAPHIR (eng. Sapphire) turntable astonishes with its exceptional design and technology. Due to its quintuple decoupling system the vibration transmission is reduced to a minimum which renders an outstanding sonority.

Included in the package

  • basis for a SME or Linn tonearm

  • a black chassis consisting of a baseplate (Nero Assoluto), a turntable with belt drive and a seating for the tonearm

  • standard power supply


All parts produced and assembled in Switzerland

Technical Specifications

Model:             Saphir

Speed:             Ranges33 1/3 and 45 rpm

Dimensions:    387/473/183 mm

Weight.            30 Kg

Technology:    Quintuplicate Decoupling System

Drive                UnitDC motor with belt drive

Bearin.             Glubricated precision journal bearing

Platter              POM

Get Your Own Unique Turntable

Our costumers have the possibility to choose their favourite stone design and the housing colour. The picture below shows the seven different stone designs which are available.

Product Details

A De Baer record player differs in many points from conventional record players:

  • The bearing for the platter and the base for the tonearm are connected with the chassis through hardened steel balls. This results in maximum stiffness with minimal contact area, thus an excellent decoupling is guaranteed. What is usually fitted on one single basis, is distributed over 5 planes in the De Baer record player.

  • The bearing for the platter is a journal bearing with highest precision. Two magnets operate axially which results in a floating turntable. Two hard chrome plated running surfaces undertake the guidance radially. The bearing bushings are made out of porous sinter material with less than 0.01 mm clearance.The bearing housing is filled with oil in order to guarantee lifetime lubrication.

  • The tonearm is mounted with magnets and high precision ball bearings. The preloaded carbon tubes counteract the oscillation of the pickup.

  • The VTA is a complex construction with analogous gauge of the position of the height which allows the adjustment during play-back.

  • The design hides the amount of installed components. A whole drive consists of 138 fabricated components.